Flipsky Dual FSESC6.7 Plus 100A 12S ESC Based On VESC6 for Electric Long Board Skateboard RC Vehicles Parts

Warm Tips:Please do not remove the shrink to protect the pcb electronics components from impurites or metals which result in short circuit or esc burnt damage.

Description:

Updated Features:

Pro switch version:

Turn on/off by pressing the button

Added can bus connector be more convenient to 4wd configure

Changed soldering process from usb port to smt soldering instead of manual soldering

Changed the big capacitors to smt mount capacitors and added more mosfets on the bottom side.

Specification:

Hardware:V6.6

Firmware:Latest firmware version

Voltage:8v-60v (safe for 3s to 12s lipo) for the dual esc

Voltage peaks cannot exceed 60v

Current:Continuous single 100a total 200a instantaneous current 400a per single total 800a for instantaneous current of the system.the values depend on the mounting and the ambient temperature around the device

5v 1.5a output for external electronics for single

3.3v 1a output for external electronics for single

Modes:Dc bldc foc (sinusoidal)

Supported Sensors:ABI hall as5047

ERPM:150000

Product Size:78x78x20mm including heat sink

Motor Wire:12awg

Power Cord:8awg

Recommend Bullet Connectors(Not Included):4MM Bullet Connector

Note:Detected battery voltage tolerance:+/-0.6V   

Package Included:

1X Double fsesc6.6 + heat sink

2X Vesc sensor wires

1X LED Button

1X Micro USB

1X Manual