JCZK 300C 470L DFC 6CH Scale RC Helicopter RTF One-key Return GPS Hover with AT9S PRO Transmitter
Description:
The 300C Scale RC Helicopter is a super-simulation process. The scale of the real machine is reduced. The whole machine is scaled down according to the real machine. Most of it is made of alloy. The whole machine adopts oxidation + sandblasting process which is much more refined than ordinary airplane models. A lot more complicated. The whole machine adopts 6s power package 950w brushless motor 60A ESC all metal high voltage steering gear.
The intelligent version uses 380A intelligent flight control system + GPS positioning.
1. It can fly at a fixed point (using the fixed-point mode you only need to control the direction front back left and right up and down. You don't need to manually control the balance it can be operated by a single joystick very stable very easy to use).
2. Accurate hovering (with GPS positioning when using the fixed-point mode both hands can be separated from the remote control the aircraft will automatically hover at a fixed point without offset real fixed point fixed height. No bombing).
3. One-key return (pull the f switch one-key return the aircraft will automatically plan the nearest route and return to the top of the take-off location with basically zero distance error. Automatic slow and vertical landing and automatically close the throttle after landing).
4. Low-voltage automatic return to home (the flight control automatically returns to home after detecting low pressure. No operator operation is required. The process is the same as the one-key return. It is very good to prevent the explosion caused by low-voltage power failure).
5. Signal interruption and return home (No signal interruption under normal circumstances but if there is an accident directly turn off the power of the remote control and the aircraft will automatically press one button to return to home during the process of landing which more comprehensively prevents the explosion).
Specification:
Brand: JCZK
Item: 300C RC Helicopter
Battery: 1350Amh 6S Lipo Battery(included)
Body Length: 700mm
Body Width: 125mm
Body height: 230mm
Main Blades Diameter: 360mm
Main Blades Length: 820mm
Main Blades Length: 69mm
Tail Blades Diameter: 180mm
Main Motor Gear: 13T
Final Gear: 151T
Tail Drive Main Gear: 56T
Tail Drive Ratio: 15T
Gear Ratio: 11:1:3.72
Weight: 1480g(not include battery)
Flying Time: 5-8mins
Flying Distance: About 1000m
Battery Mount: 120*40*30mm
Battery Mount: 120*40*30mm
Features:
- With 380A smart fly system support GPS function.
- Support hover self-stabilization and automatic calibration.
- Support helicopter head oriented flying.
- One-key return low-voltage return signal interrupt return
- 6CH 3D flying brings you amazing flying experience.
- 1000m flying distance and 8mins flying time.
- 2.4G 9CH Transmitter supports low-voltage alarm protect your helicopter better.
Manual: Click here
Manual: Click here
Package:
1* 300C RC Helicopter
1* AT9S PRO Transmitter
1* 300C Motor
1* 1350Amh 6S Lipo Battery
1* Receiver
1* GPS
1* Tail Servo
3* Swashplate Servo
1* 60A ESC
1* B3 Charger
