BETAFPV Cetus Kit 1S FPV with 1/4" CMOS Sensor 800TVL Camera Optical Flow Positioning System VR02 Goggles Racing RC Drone Quadcopter
BETAFPV Cetus Kit 1S FPV with 1/4' CMOS Sensor 800TVL Camera Optical Flow Positioning System VR02 Goggles Racing RC Drone Quadcopter
Description:
| Item | Specification | |
| Cetus FPV Kit | Positioning System | Optical flow / Barometer |
| Height Positioning | Barometer | |
| Angle Locating | Optical flow ( effective height 0.3-3m) | |
| Accuracy of auto-hover | Horizontal +-0.2m | |
| vertical +-0.3m | ||
| Receiver protocol | Frsky D8 | |
| Flight controller | Lite 1S Pro brushed FC | |
| VTX | 25mW | |
| Camera Tilt Degree | 25deg | |
| Camera | C01 FPV Camera | |
| Transmitter | Literaio2 SE Transmitter | |
| TX mode | Mode 2 (Left stick throttle) | |
| Goggles | VR02 Goggles | |
| Motor | 716-19000KV Brushed motor | |
| Propeller | 31mm 4-blade 0.8mm shaft hole | |
| Takeoff weight | 35g(with battery) | |
| Power system | 1S | |
| Battery | BT2.0 300mah 1S Battery (external) | |
| Flight time | 4-5min | |
| Flight distance | 80m (in wide & undisturbed environment) | |
| C01 FPV Camera | Image Sensor | 1/4' CMOS Sensor |
| Horizontal | 800TVL with Global WDR | |
| Signal System | NTSC | |
| Lens | 2.1mm(M8) FOV 160deg | |
| S/N Ratio | >50db | |
| Electronic Shutter Speed | Auto | |
| Auto Gain Control (AGC) | Auto | |
| Min. Illumination | 0.01Lux@1.2F | |
| D-WDR | Auto | |
| Power | DC 3-5.5V | |
| Current | 110mA@5V / 120mA@3.3V | |
| Housing Material | ABS | |
| Dimension | 11*11mm | |
| Net weight | 1.4g | |
| LiteRadio 2 SE Radio Transmitter | Color | White |
| Frequency Range | 2.4G (2403MHz-2447MHz) | |
| 2.4G System | NRF24L01 or CC2500 | |
| Channel | 8 | |
| Support Protocol | Bayang | |
| Futabas S-FHSS | ||
| Frsky FCC D16 | ||
| Frsky LBT D16 | ||
| Frsky D8 | ||
| Power | <=100mw | |
| Adapted Drone Type | Multirotor | |
| LED Light | Green-Power On | |
| Red-Warning if the voltage is lower than 3.5V | ||
| Blue-Normal | ||
| Battery | Built-in 1000mAh 1S Battery | |
| Charging Connector | USB 3.0 Type-C | |
| VR02 FPV Goggles | Dimension | 126x143x86.3mm |
| Weight | 300g with 2hr 2000mAh battery | |
| Belt | Three-Ways adjustable belt | |
| screen size | 4.3 inch | |
| Screen resolution | 800*480 px | |
| Screen brightness | 300cd/m2 | |
| View Angle | 55deg | |
| Charging | Type-C Charging | |
| Voltage | 3.7V the device operating current of 500mA@3.7V | |
| Current | 500mA | |
| BATTERY | 3.7V/2000mAh | |
| working time | Around 2 hours | |
| 7x16mm Brushed Motors | Size | 7x16mm |
| Width | 7mm | |
| Height | 16mm | |
| Cable lengt | 50mm | |
| Shaft Diameter | 0.8mm | |
| Weight | 2.95g per motor | |
| Speed | 19000KV | |
| Voltage | 3.7V | |
| Connector | JST 1.25mm 2P connector | |
Features:
-Auxiliary flight function is suitable for beginner greatly reducing the threshold of operating. Now everyone can fly!
- Including N-Mode S-Mode M-Mode which can satisfy different needs of pilots and adapt to various flight environments.
- Cetus brushed quadcopter LiteRadio2 SE transmitter VR02 FPV Goggles batteries charger etc. everything needed for flight is included.
- Equipped with Type-C port charging cable unified charging port for all parts more convenient for charging.
- All items are stored in a EVA portable storage bag which provides better protection and easy to carry.
Package Included:
1 * Cetus Brushed Quadcopter
1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol)
1 * VR02 FPV Goggles
2 * BT2.0 300mAh 1S Lipo Battery
1 * BT2.0 Battery Charger and Voltage Tester
1 * USB Charging Cable (Type-C)
1 * Type-C Adapter
1 * Prop Removal Tool
4 * 31mm 4-Blade Props
1 * Portable Storage Bag
